Call us on 0345 241 1441 Monday to Friday 9:00am - 5:00pm

The original and best

Our patented HEATBANK® thermal store system is the original plate heat exchanger design, with more than 10,000 installations and proven reliability and performance.

Systems have been installed as far afield as New Zealand, and seen on numerous high profile contracts, including Channel 4’s Escape to the Chateau, with clients taking advantage of our industry leading expertise and design services to deliver the best solution every time.

Thermal Stores quick to install

Quicker to install

We pretty much invented pre-fabricated hot water systems, with systems designed, manufactured, plumbed, wired and tested in our factory to make the installer’s life as simple as possible.

Many, if not all, of the controls are selected and factory fitted, ready to connect site pipework to, and wired to follow the correct controls logic for the system in hand.

Thermal Stores safer systems

Safer systems with greater efficiency

Combining heat sources safely and efficiently is an art, evolved over many years to ensure all the safety boxes are ticked, while matching heat sources to loads in harmony.

High temperature sources can run radiators, while simultaneously lower temperature sources can run underfloor heating.

Thermal Stores high performance

Fantastic performance

Heat exchangers transfer heat extremely quickly, ideal for mains pressure showers and fast filing baths.

Because heat is always stored in the same water, they do not experience the problems of limescale build-up associated with other types of hot water storage system.

Safely combine heat from renewable sources

Our HEATBANK Xcel supports the combination of multiple heat sources, (such as biomass boilers, heat pumps, solar and wood burners) to provide hot water and central heating, making it possible to run domestic properties from a zero-carbon approach.

Approved for use by all wood burner manufacturers, the Xcel’s track record on safety and performance is beyond approach.

Exceptional reliability and performance provided by better technology

A thermal store is a cylinder used to store thermal energy, typically filled with primary central heating water. Increasingly popular in domestic settings, thermal stores operate by drawing mains pressure cold water through a high efficiency heat exchanger to supply heating and high-pressure hot water.

  • Fresh mains water supplied to both hot and cold taps
  • Instant heat and mains pressure hot water
  • Low running costs
  • Fit-and-forget reliability
  • No risk of Legionella
  • Any combination of heat sources
  • Any combination of heat loads
  • Pre-plumbed and pre-wired for rapid installation

Anything is possible

HEATBANK Xcel’s are built up using a selection of connections and pipework assemblies to suit the job in hand. The more popular combinations are covered in the standard designs listed below.

Custom systems on application.

DS-6 Multifuel Open Vented Boiler, Gravity Wood, Solar, DHW Plate Heat Exchanger

  • Stainless Steel Thermal Store
  • 130 to 500 litre Capacities with Slimline options
  • Connections for Direct Boiler Input up to 30kW
  • Connections for Central Heating circuit
  • DHW generated using a Plate Heat Exchanger up to 35 l/min
  • DHW Thermostatic Mixing
  • Immersion Heater Boss
  • Connections for Gravity Wood Burner
  • Power free Overheat Discharge Coil and Valve 95°C
  • Solar Coil

DS-14B BASIC, Open Vented Boiler, Pumped Wood, Solar, DHW Plate Heat Exchanger

  • Stainless Steel Thermal Store
  • 130 to 500 litre Capacities with Slimline options
  • Connections for Direct Boiler Input
  • Connections for Central Heating circuit
  • DHW generated using a Plate Heat Exchanger up to 35 l/min
  • DHW Thermostatic Mixing
  • Immersion Heater Boss
  • Connections for Fully Pumped Wood Burner Circuit
  • Solar Coil

DS-14 Open Vented Boiler, Gravity Wood, Solar, DHW Plate Heat Exchanger

  • Stainless Steel Thermal Store
  • 130 to 500 litre Capacities with Slimline options
  • Direct Boiler Input Assembly Up to 30kW
  • Connections for Central Heating circuit
  • DHW generated using a Plate Heat Exchanger up to 35 l/min
  • DHW Thermostatic Mixing
  • Immersion Heater Boss
  • Fully Pumped Wood Burner Circuit Assembly
  • Solar Coil

Talk to the experts – call us now on 0345 241 1441 or email enquiries@heatweb.co.uk

Copyright © 2021 Thermal Integration

Marketing by Unity Online