
The plant
The scheme needed plant-room provision of domestic hot water, underfloor heating, radiator circuits and a commercial zone, combining heat from gas boilers, CHP and an extract air heat pump. Our HIFLOW modular units suited it well:
- six modules for 1.5 MW of domestic hot water
- two modules for radiators, three for underfloor heating and two for the commercial zone
- 8,000 litres of custom-made buffer storage

The modules work together to match the load and give a high level of redundancy. That modular approach means the site has had 100% delivery of every service since turn-on.
Two grades of heat
The units draw from two sources, a high-grade one (boilers and CHP) and a low-grade one (the heat pump), and blend the two feeds so that all the plant runs at its best efficiency.
Remote control and monitoring
The whole system runs on our iHIU control system and is monitored remotely. That has let us adjust setpoints, add screed-drying cycles when installers asked for them, and show historic performance down to 10-second intervals.

Putney Plaza was also a field trial in our SBRI open-source controls project, which upgraded the control of the boilers, CHP, heat pumps and circulating pumps around the buffer stores and the common boiler header.

