ESW500 Ethernet Switch
The ESW500 range of Industrial Managed Ethernet Switches establish Ethernet network connections to multiple billing systems, or iHIU controllers.
Ethernet cables are limited to a maximum length of 90 metres. For establishing networks with distances of over 90 metres between switches, please refer to the options for the Ethernet Switch with Fibre Optic Connections.
- 8 or 16 port options
- Light industrial design EN61000-6-1 specifications
- NEMA TS2 (ESW508-T)
- Shock and vibration tested
- -10 to 60°C or -40 to 75°C (-T models) temperature rating
- Supports IEEE 802.3 10Base-T,802.3u 100Base-TX
- RJ-45 port supports auto MDI/MDI-X function
- SC single mode and multi mode fiber connectors
- Gigabit options with copper and SFP combo ports
- Web browser management and configuration
- Ring On redundant rapid recovery system, 15 mS
- Rapid spanning tree protocol recover system
- IGMP with query mode for multimedia application
- Port based VLAN / 802.1 Q Tag VLAN
- Relay alarm output for system events
- Port mirroring for diagnostics
- 256K bytes packet buffer
- 8k MAC address table
RingOn Technology
Two ports can be used for network redundancy by implementing RingOn technology providing a rapid recovery system for industrial networks. If any part of the ring disconnects the network communications will automatically be restored.
Web-based Management
Each switch has an embedded HTML web site residing in flash memory, offering advanced management features allowing users to manage the switch from anywhere on the network via a standard web browser.
VLAN Configuration
A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. This allows you to isolate network traffic so that members of a VLAN will only receive traffic from other members of the same VLAN.