| Primary |
|---|
| Nominal primary supply temperature |
| Maximum primary supply temperature |
| Minimum primary supply temperature |
| Maximal primary differential pressure (without dP regulator) |
| Maximal primary differential pressure (with dP regulator) |
| Minimal primary differential pressure |
| Pressure class DH circuit |
| Domestic Hot Water |
| Nominal DHW supply temperature |
| DHW Set Range |
| Domestic Hot water heat exchanger (DHW) |
| Keep Warm Modes |
| Keep Warm Temperature |
| Keep Warm Duration |
| Max Return Temperature during Keep Warm Mode |
| DHW Max pressure |
| Pressure class DHW circuit |
| Central Heating |
| Maximum flow temperature |
| Return Temp Limit Range |
| CH Limit Range |
| Central heating heat exchanger (CH) |
| Pressure class CH circuit (3 bar safety valve) |
| CH working pressure |
| Nominal pump pressure |
| Maximum recommend flow rate |
| Pump Over-run |
| Pump exercise function |
| General |
| Primary connections |
| Mains & DHW connections |
| Central heating connections |
| Pressure relief |
| Casing width |
| Casing height |
| Casing depth |
| Casing Material |
| Maximum Heat Losses |
| Typical Heat Losses (DHW Only, Keep Warm) |
| Weight (basic version) |
| Electrical supply info |
| Power consumption per year |
| Fuse ratings |
| Sensors |
.* Maximum primary supply temperature 100°C for momentary spikes. .** Minimum required DH supply temperature is DHW setpoint + 5°C with a minimum of 55°C. .*** Depends on requested DHW output and available DH supply temperature. .**** Unit weight may vary depending on the optional components built into the unit.