Case study

MEHNA and BESA heat network training: writing two of the first modules

When government-funded heat network training launched in 2024, Heatweb was invited by BESA and MEHNA to write two of the seven initial training modules: HIU fault finding, and monitoring and metering.

Download the two-page case study (PDF)

The background

In April 2024 the UK Government began funding individuals £500 each to attend approved heat network training courses. At the heart of the training are the MEHNA/BESA modules, developed by the industry and delivered as online courses backed by training centres.

Heatweb joined MEHNA (Manufacturers of Equipment for Heat Networks Association) when we were a leading UK manufacturer of thermal stores, substations and HIUs. In our current role as consulting and service engineers we work as a service supplier to MEHNA's manufacturers rather than a competitor, and our experience as an OEM has helped unify the processes all the manufacturers use, training material especially.

BESA (the Building Engineering Services Association) represents engineers in the industry and has teamed up with MEHNA to deliver manufacturer-led guidance and training. We had worked with BESA before on its HIU testing standards: the DATA HIU, designed by Heatweb, was at one point used to calibrate BESA test houses because of its precision and test record, holding the lowest VWART figures in the industry for five years running.

The two modules

HIU fault finding. Covering every standard type of HIU, mechanical and electronic. We compiled fault-finding charts and processes that apply to all manufacturers without bias, wrote the course content and material, and wrote the assessment questions.

Monitoring and metering. Relating to compliance with CP1, the Code of Practice for heat networks. With the industry moving to regulation through HNTAS (the Heat Network Technical Assurance Scheme), following CP1 standards and processes is the best way to prepare. As technical authors for both CP1 and HNTAS, and as former OEMs, we were well placed to write guidance and training that introduces engineers to the processes required.

Uptake

Demand went beyond expectations: more than 800 engineers registered their interest in the first few weeks. Heatweb engineers were on one of the first courses, and the feedback has been very good.

Next: training for BMS engineers

We plan to produce the first heat network training guides for BMS engineers, so they can implement specific functions correctly and comply with both CP1 and HNTAS, which relies heavily on BMS control points for acceptance testing and operational monitoring. We also want every BMS engineer to be well grounded in the IoT protocols BMS systems already support, such as MQTT, ready for future compliance.

See also our heat network training courses.

Talk to an engineer

Tell us about your network and we will come back with a practical next step, usually within one working day.